The first night I wore the Somnofit-S, I took it out after about forty minutes and set it on the nightstand. Not because it hurt. Because it felt foreign enough that my brain would not let me drift off with it in. That is the honest start to this review, and it is the part most mouth guard write-ups skip on the way to the star rating.
I am 62, I live in Colorado Springs, and I have snored loudly for close to twenty years. My wife Linda is a light sleeper, and before I got serious about any of this she was spending more nights in the guest room than in our bed. A home sleep test a few years back came back as moderate obstructive sleep apnea, so I sleep with a CPAP machine and a nasal pillow mask most nights. The Somnofit-S by SnoreLessNow is not a treatment for apnea. Nothing you buy in a box is. If your partner has heard you stop breathing, get the sleep study first and let a doctor tell you what is safe. What a mouthpiece like this can do is cut the noise down, and for a lot of couples that is the difference between one bedroom and two.
The Quick Verdict
Small enough to actually wear, comfortable once you get the mold right, and honest about what it will not do. Give it a week before you decide, and re-mold it if the first try feels bulky.
Amazon Check Today's Price →The Reason I Could Wear This One at All Is How Little Room It Takes Up
I gagged on a bulkier guard a couple of years back and gave up inside a minute. This one sits far enough back that I forget it is there. Check the current listing, read the return terms, and plan on a second molding attempt.
Amazon Check Today's Price on Amazon →How I've Used It
I have worn it for about five weeks now, most nights, and I kept a note on my phone each morning for the first two because I did not trust my memory. Night one lasted forty minutes. Night two, about two hours. By night four I slept through until the alarm, which had not happened without the CPAP in a long stretch. I am not going to tell you I woke up feeling eighteen. I woke up with a slightly tired jaw and a wife who had stayed in our room.
I tried two other things before this one and both failed for reasons that had nothing to do with snoring. The first was a chin strap that pulls your jaw shut from underneath. It worked for maybe three nights, then I woke up with a headache sitting right behind my eyes and a red groove across my chin that took until noon to fade. The second was a wedge pillow that props your whole upper body up at an angle. I will give it credit, it did quiet the noise, but I slid down the thing every single night and by morning I was flat on my back with the wedge somewhere down near my knees. Linda found it on the floor twice in one week. A mouthpiece at least stays where you put it, which sounds like a low bar until you have spent a month chasing a pillow.
The way it works is straightforward. It holds your lower jaw a little forward of where it sits on its own, which opens the airway at the back of the throat and quiets the vibration that makes the noise. You feel it for the first twenty minutes. Then you stop feeling it. That has been my experience nearly every night since the first week, and it is the whole reason I kept going after that rough start.
There is a tradeoff I want to be straight about. Holding the jaw forward is a position your jaw is not used to spending eight hours in. For the first week my front teeth felt loose in the morning and my jaw was stiff until I had coffee. That faded for me around day nine. It does not fade for everybody, and if it does not fade for you, that is a real reason to stop, not something to push through because a listing said it was comfortable.
What Nobody Tells You About Boil-and-Bite
Every listing for this kind of device says boil and bite like it is one step. It is not one step. My first mold was a mess. I left it in the hot water too long because I was trying to be careful, pulled it out, and it was too soft to hold any shape. Then I bit down too hard and made it shallow. I could not get my back teeth to sit in it at all. I wore that first mold for two nights, hated it, and started over.
The second attempt took ninety seconds and worked. Water off the boil rather than boiling, sixty seconds in, out with a slotted spoon, about ten seconds to cool, then bite down firmly and hold for roughly thirty. The difference between those two molds felt like two different products. So if you try this and it feels bulky and loose, do not conclude the device is bad. Re-mold it. You get a few tries out of the material before it stops taking a set.
One more thing about the mold that I wish somebody had told me up front. Do it in the evening when you are not rushed, and do it an hour after you have eaten or had anything to drink, because the warm polymer picks up whatever taste was already in your mouth and gives it back to you. I did my second attempt on a Sunday afternoon at the kitchen sink with a timer sitting on the counter, and I did not talk and did not swallow for the full thirty seconds. That sounds easy. It is not. When I finally pulled it out, the bite marks were even on both sides, front to back, and that is how you know you got it right. On my first try only the right side had marks. I did not know enough then to read that as a problem, and I paid for it with two bad nights.
The specs on this one matter more than specs usually do. It is a thermoplastic polymer, made in Switzerland, cleared by the FDA, and free of BPA, latex, phthalates and silicone. Thermoplastic means heat softens it, which is the entire basis of the molding, and it also means you should not leave it on a dashboard in July or in a hot car overnight. SnoreLessNow's 40% smaller figure is the one I actually noticed. A friend's mouthpiece, which I tried once, hit the back of my tongue and I gagged inside a minute. This one sits far enough forward that I forget it is there.
Fit Is the Whole Ballgame
People ask whether it will fit. The honest answer is that no mouthpiece fits until you mold it, and after that it fits as well as your mold was good. The unit measures about 4.72 by 3.94 by 1.97 inches in its case and ships at 5.29 ounces, so there is nothing about the size of the thing that should worry a normal adult mouth. The variable is you, not the product.
I have a wide, flat palate and a fairly large tongue, and I had one spot on the lower left that rubbed for the first four nights. I took a nail file to that edge for about ten seconds and never felt it again. That is a normal adjustment, not a defect, and it is worth knowing before you write the whole thing off.
For what it is worth, my dentist took a look at the mold during a cleaning in week three and told me it looked even, which surprised me given the nail file. He also told me the thing I already suspected, which is that a do-it-yourself guard is not the same as one he would have made, and that if my jaw was still aching past two weeks I should come back in and let him look properly. It was not still aching. I mention the visit because a lot of reviews on this kind of device get written in week one, while everything is still settling, and a week is not long enough to know whether the fit is actually good or just tolerable. The tenderness I had early on was not the mold being wrong. It was my jaw being asked to do something new for eight hours at a stretch.
The Even Pressure Distribution System they describe in the listing is not marketing filler from where I sit. The load lands on your front teeth, and a poorly shaped guard concentrates all of it on two incisors, which is exactly how people end up with sore front teeth at three in the morning. This one spreads the load across the front four or so. Mine were tender the first week but never painful, and I know what painful feels like.
I have tried three mouth guards. Two of them I threw across the room. This is the first one I have worn five weeks straight without dreading bedtime.
The Dry Mouth Question, Answered Honestly
Here is what this device will not fix. Colorado is dry, the furnace runs from October to April, and I breathe through my mouth the moment I am deeply asleep. A mouthpiece that holds your jaw forward does not change that. I still wake up with a dry mouth, still reach for the water glass on the nightstand, and still get that cottony taste around four in the morning. If dry mouth is your main complaint, this is not the tool that solves it.
What helped me was boring. A humidifier in the bedroom set on medium and filled every night. A glass of water within arm's reach. A saline spray before bed during the worst of the winter. That combination cut my dry mouth by maybe half. The mouthpiece did nothing for it either way, and I would rather say that plainly than pretend otherwise.
I tested the difference on purpose for one week, wearing it five nights and skipping two, and the two mornings after the skipped nights were the two mornings I woke with my tongue stuck to the roof of my mouth. That is not a big enough sample to prove anything and I am not going to pretend it is. It is just what I noticed. What I can say with more confidence is that the mouthpiece is not the reason my mouth is dry. The dry air is. Colorado Springs sits around six thousand feet, and a cheap hygrometer on the dresser told me the bedroom was sitting at 22 percent most of last winter. The humidifier got it up to about 40, and that is exactly where the difference showed up in the mornings. If you live somewhere damp, you may never have this problem and half of this section will not apply to you.
There is one indirect effect worth mentioning. On the nights I wear it, my jaw position brings my lips together for more of the night than they are without it, so I wake up noticeably less like sandpaper than on the nights I skip it. That is not a designed feature and I am not going to sell it as one. It is just what happens.
Cleaning, Storage, and How Long It Lasts
Cleaning is thirty seconds. Cool water, a soft brush, a drop of dish soap, rinse, air dry in the open case. Once a week I drop it in a denture tablet for ten minutes because by day six anything that lives in your mouth starts to smell like it. Do not use hot water for cleaning. Hot water is for molding and nothing else.
I am on week five with the same mold and it is holding up. The material has not gone cloudy, the edges have not frayed, and the shape has not relaxed. Based on how it feels now I would guess four to six months of nightly use before it needs replacing. Keep the case. Mine lives in the bathroom drawer inside it, which keeps it off the floor and out of the way.
What I Liked
- Profile is small enough that I stopped noticing it inside twenty minutes
- Re-moldable, so a bad first bite is not a wasted purchase
- Load spreads across the front teeth instead of two incisors
- Made in Switzerland, FDA cleared, and free of BPA, latex, phthalates and silicone
- Cut my snoring enough that Linda moved back into the bedroom
- Cleans in half a minute and holds its shape past a month
Where It Falls Short
- First week brings jaw stiffness and tender front teeth for a lot of people
- Does nothing for dry mouth, which is worse in a dry climate
- Not a treatment for sleep apnea and must never be used as one
- The first mold is easy to get wrong and the printed guidance is thin
- Wearing something in your mouth all night is still wearing something in your mouth all night
Where the Somnofit-S Fell Short
Two things. The first is the instructions. What ships in the box is thin, and the water temperature, the soak time and how hard to bite are the three things that decide whether this works at all. I got them from a video rather than from the packaging. A printed card with a clear step list would save a lot of returns, and I say that as a guy who ruined a mold on attempt one.
The second is that it is not a fix for a bad sleep position. I am a back sleeper, and on my back my jaw drops open and the snoring is worse. The mouthpiece helps, but the nights I roll onto my side are still quieter than the nights I do not. If you are serious about this, the mouthpiece is one piece of it. Weight, beer before bed, and sleeping on your side are the other pieces, and none of them come in a box.
Who This Is For
Snorers whose bed partner is losing sleep and running out of patience. People who tried a bulky guard and gagged on it in the first minute. Back and side sleepers who want something they can put in at bedtime and forget about by the time the light is off. Couples who are one bad month away from separate rooms and want to try the cheaper thing before the expensive thing. If that describes you, the Somnofit-S is a reasonable place to start, and SnoreLessNow has made the fit side of it easier than most of what I have tried.
Who Should Skip It
Anyone with diagnosed sleep apnea who is thinking about swapping this in for their CPAP. Do not. Apnea is a medical condition with real consequences for your heart, and a mouth guard is not a treatment for it. Talk to your doctor about a fitted oral appliance, which is a different device made by a professional. Also skip it if you have loose teeth, active gum disease, or a jaw joint that already clicks and hurts, because holding your jaw forward all night is the last thing that jaw needs. And skip it if you cannot commit to a week of adjustment. This is not a device that works on night one, and pretending otherwise does nobody any favors.
Five Weeks In, It Is Still on My Nightstand and Still in My Mouth
It took a second mold, a nail file and nine days of a stiff jaw to get here. That is the real cost. If you are willing to pay it, this is the most comfortable guard I have worn.
Amazon Check Today's Price on Amazon →