I slept with a drugstore boil-and-bite mouthpiece for the better part of a year before I tried the Somnofit-S by SnoreLessNow. I am 62, I live in Colorado Springs, and I have been a loud snorer for about 20 years. Linda, my wife of 34 years, is a light sleeper. Before I got my sleep apnea diagnosed and started CPAP, she was in the guest room more nights than not. I still use my CPAP. I am not looking for a gadget to replace it. But on a trip or a night when a cold makes the nasal pillow mask a hassle, I wanted something smaller than the bulky guard I had been using. That is the honest frame for this comparison.
The short answer: the Somnofit-S is the better fit for me, and not because it is fancy. It is a boil-and-bite mouthpiece too. The difference is the amount of material and the way it is built. The listing says it is 40% smaller than most on the market, made in Switzerland, FDA cleared, and built with an Even Pressure Distribution System. The standard boil-and-bite guard I used before was cheaper to try and easier to find at a drugstore. It also felt like a hockey puck in my mouth by 2 a.m. If you have diagnosed sleep apnea, none of this is treatment. Talk to your doctor. A mouthpiece is not a CPAP substitute.
| Somnofit-S by SnoreLessNow | Standard boil-and-bite mouthpiece | |
|---|---|---|
| Molding process | Simple boil-and-bite, mold it to your jaw | Boil-and-bite, but more material to seat evenly |
| Size in the mouth | 40% smaller than most on the market, per the listing | Often bulkier, with more material around the tongue |
| Pressure across the teeth | Even Pressure Distribution System | Usually one solid molded block |
| Adjustability after molding | Adjustable design | Usually fixed once molded |
| Material disclosure | Thermoplastic polymer, BPA, latex, phthalate and silicone free | Varies by brand, check the label |
| Cleaning routine | Rinse after each use | Rinse after each use |
| Cost to try | Higher cost to try | Lower cost to try |
| Best first step | Someone who has tried a bulky guard and wants a smaller adjustable option | Someone testing whether they can tolerate any mouthpiece |
Where the Somnofit-S Wins
The first win is size. The Somnofit-S by SnoreLessNow is 40% smaller than most mouthpieces on the market, according to the manufacturer. I noticed that before I noticed anything else. The old guard filled the space behind my front teeth and pressed on my tongue. The Somnofit-S sits in a smaller footprint. I could close my lips without feeling like I was holding a wad of plastic. That matters at 2 a.m., when your body decides it wants to swallow and your mouthpiece has other plans. A smaller mouthpiece is not automatically a better mouthpiece, but for me it was the difference between keeping it in and taking it out. I timed it once, out of curiosity. The old guard went in at 10:40, came out by 12:15, went back in at 1:30 and was out for good by 2. The Somnofit-S went in at 10:30 and stayed until the alarm. That is not a scientific measure of anything. It is just what the night looked like on my nightstand.
The second win is the Even Pressure Distribution System. That is the manufacturer's name for how the mouthpiece spreads force across the teeth instead of loading one spot. My old guard had a high spot on the right side. I would wake up with a dull ache there and move the guard around with my tongue. With the Somnofit-S, I do not get that one-spot soreness. I am not saying it disappears. Any mouthpiece takes getting used to. But the pressure feels more even, and that is why I stopped reaching for the drugstore guard. The adjustable design also let me tune the fit after the first mold, which is more than I could say for the old one.
Where a Boil-and-Bite Mouthpiece Wins
Cost to try. A standard boil-and-bite guard from a drugstore is cheaper to test than a specialty mouthpiece. If you have never worn anything in your mouth at night, that matters. Some people cannot tolerate a mouthpiece at all. They gag, they drool, or they take it out at 3 a.m. and never touch it again. A low-cost drugstore guard is a sensible first experiment before you spend more on a fitted option. I am not going to pretend otherwise. The Somnofit-S is the one I use now, but I started with the cheap one and I do not regret it.
Availability. You can walk into a pharmacy and walk out with a boil-and-bite guard the same day. That is not nothing. If you are leaving on a trip tomorrow, or your bed partner is at the end of their rope tonight, the drugstore guard is the one you can actually get. The Somnofit-S is a specialty product. It is not a knock against it. It is just the tradeoff. The drugstore guard wins on convenience and on the cost of finding out whether a mouthpiece is for you. For a lot of people, that is the right first step.
If you have already tried bulky, the smaller fit is worth a look
The Somnofit-S is a boil-and-bite mouthpiece with a 40% smaller profile than most, an adjustable design and an Even Pressure Distribution System. It is FDA cleared and made in Switzerland. It is not a treatment for sleep apnea. If you have diagnosed apnea, keep working with your doctor.
Amazon See Current Details on Amazon →How the Fit Actually Feels at 2 A.M.
You boil it, let it cool a few seconds, bite down, and hold. The directions matter. I rushed my first try and got a shallow mold. I redid it and the second fit was better. The material is a thermoplastic polymer. It softens in hot water and sets as it cools. That is the same basic idea as a drugstore guard, but the Somnofit-S has less material to manage. Less material means fewer places to press on your gums and fewer places to trap saliva. It also means you need to read the directions. A sloppy mold is a sloppy fit, no matter what you paid. I molded mine on a Tuesday evening at the kitchen sink with a pot of water and a pair of tongs. Linda timed it. I held the bite for the full count instead of bailing early like I did the first time. The second mold seated better on the left side, which is the side that had given me trouble. Rush the hold and you get a guard that rocks.
I sleep mostly on my back. Linda says I still snore on my back, just less. I am not going to pretend a mouthpiece fixed 20 years of snoring. It did not. But the Somnofit-S stays in. My old guard would slip forward when I rolled onto my side. The smaller profile seems to help it stay put. That is my experience, not a promise about yours. If you are a hard clencher or you move a lot, give yourself a week before you decide. The first two nights felt strange. By night five I stopped noticing it.
Colorado is dry, and our bedroom is dry all winter. A mouthpiece can make dry mouth worse if you are not careful. I keep water by the bed and rinse the guard in the morning. The Somnofit-S is not a fix for dry mouth. It is a piece of plastic you put in your mouth. If your mouth gets dry, deal with the room, not just the guard. A humidifier helped me more than any mouthpiece. That is not the product's fault. It is just the reality of sleeping at altitude with the heat on.
The Material and Cleaning Question
The SnoreLessNow Somnofit-S is made of thermoplastic polymer and is free of BPA, latex, phthalates and silicone, according to the listing. That was one reason I was willing to try it. The drugstore guard I used before did not tell me much about its material. Maybe it was fine. I do not know. I like knowing what is in the thing I sleep with. If you have allergies or sensitivities, check the label and ask your dentist. I am not a dentist. I am a retired delivery driver with a dry bedroom and a wife who needs sleep.
Cleaning is simple: rinse it after each use, let it dry, and keep it away from heat. Do not leave it on a sunny windowsill. Thermoplastic softens when it gets hot, which is the whole point of the boil-and-bite process, but you do not want it warping on its own. I rinse mine in the morning, shake it off, and put it in a small container on the nightstand. That routine is the same for any mouthpiece. The Somnofit-S is not harder to clean than the drugstore guard. It is just smaller, which makes it easier to lose if you are not careful. I wash mine with cool water and a drop of dish soap every third day and rinse it the rest of the time. Hot water is a bad idea once it has set. My first drugstore guard went soft in a hot car in July and never fit the same after that. I learned that one the hard way on the drive back from Denver.
What It Does Not Fix
It does not fix sleep apnea. I want to be blunt about that. I have moderate obstructive sleep apnea. I use a CPAP with a nasal pillow mask. The Somnofit-S is a snoring aid, not a treatment for apnea. If you have pauses in your breathing, or your partner has seen you stop breathing, get a sleep study. Do not buy a mouthpiece and call it done. I tried the Somnofit-S on nights when I could not use my CPAP, and I talked to my doctor first. That is the only responsible way to look at it.
It does not fix a dry room, a stuffy nose, or a bad sleep position. It does not make you a different sleeper. It is one small tool that can help with snoring and mouth breathing if you can tolerate it. Linda still wears earplugs on some nights. I still wake up sometimes. The goal is not a perfect night. The goal is fewer 3 a.m. elbows and fewer mornings where she slept in the guest room. On that measure, the Somnofit-S is better than the drugstore guard for me. It is not a fix for everything.
Who Should Buy Which
Buy the Somnofit-S if you have already tried a standard boil-and-bite guard and found it too bulky, too hard to keep seated, or too rough on one spot of your teeth. Buy it if you want an adjustable mouthpiece with a smaller profile and you are willing to follow the molding directions. Buy it if you have talked to your doctor about your snoring and you understand that this is a comfort and snoring aid, not a treatment for sleep apnea. It is also a reasonable option if you travel and want something smaller than your CPAP for nights when you cannot use it, but that is a conversation for you and your doctor, not a decision I can make for you. The SnoreLessNow product is the one I keep in my nightstand now. There is also the question of the nights you take it out. I give myself one night a week off, usually Sunday, and sleep with nothing in my mouth. That is not advice, it is just what I do. Knowing an off night is coming makes the other six easier.
Buy the drugstore boil-and-bite guard if you are brand new to mouthpieces and you do not know whether you can tolerate one. Buy it if cost is the deciding factor or you need something today. Buy it if you want to test the idea before you spend more on a specialty product. There is no shame in starting cheap. I did. The drugstore guard got me through a year. It was not comfortable, but it taught me that a mouthpiece could help me breathe through my nose and keep my mouth closed. That was worth the experiment. Then I moved up to the Somnofit-S when I knew the idea worked.
The smaller, adjustable option for someone who has tried the bulky one
If you already know a mouthpiece can work for you and you want less material in your mouth, the Somnofit-S is the one I use. It is FDA cleared, made in Switzerland and 40% smaller than most, per the listing. It is not a treatment for sleep apnea. Keep your sleep study and your doctor in the loop.
Amazon See Current Details on Amazon →